MCB-1

MCB-1

Categories: , , , ,

The MCB-1 is a semi-automatic and adjustable machine specially designed for gluing the bottom flaps of HSC and RSC boxes, also known as telescopic, Type C-20 or B-1.

  • Flexible machine as a small adjustment allows you to form bottom and lid.
  • There is a double version, which allows us to close both the upper and lower flaps of the RSC box with the product inside.

 

Contact:

 

Description

The MCB-1 is a semi-automatic and adjustable machine specially designed for closing the top flaps of HSC and RSC boxes.
  • The MCB-1 is designed to improve your productivity, as it is a machine that allows you to form both bottoms and lids with a simple gesture.
  • Another advantage is its dimensions, since it is a small machine that allows us to install it using very little space.
  • The MCB-1 requires low maintenance.

Additional information

Operation

Mechanical, Electrical and Pneumatical
Glue System

Glue Injection, Hot Melt (Nordson o Melton)
Box Design

HSC and CSR
Production

Up to 800 c/h.
Total Power

4 Kw (Optional Compressor)
Net Weight

550 kg.
Electrical Supply

380/220 V (3F+N+PE) – 50/60 Hz
Change of Size

By clamps with threaded rods and counters
Working Air Pressure

6 BAR
Air Consumption

270 l/min.
Machine Frame

4mm Steel plate

Boxes Types

Related products

  • Q-2400
    Read more Quick View

    Q-2400

    The Q-2400 combines innovation and flexibility in a machine capable of satisfiying the most stringent customer requirements.

    The Q-2400 is a high production machine that can reach an output of up to 3,000 trays or boxesper hour, depending on the carton.

    It can assemble multiple designs and box formats, some designs can reach up to 300 mm. in height and/or 800 mm. in width.

  • Inserter
    Read more Quick View

    Inserter

    The Inserter is a machine that allows us to form a Cover Box and insert the Bottom Box into it .

    The objective of this procedure is: “To be able to fill the box with products avoiding that the overfilling collapses the bottom box which would make it impossible to place the lid box.”

    This system is widely used in citrus products where they are filled with many kilos.

    • The machine achieves a maximum output of up to 1,000 boxes per hour and can be incorporated into a production line.
    • The Inserter is equipped with a belt for the insertion of the bottom box, already assembled, and a 1,500 mm blank feeder (for approximately 150 blanks), which increases autonomy and avoids interruptions in production.

  • MCT-1/VE
    Read more Quick View

    MCT-1/VE

    The MCT-1/VE is a fully mechanical and compact double head machine for the forming of punnets and small trays.

    • It can formconical and/or straight punnets or small trays.
    • Reaching an output of up to 6,000 punnets per hour (3,000 per head).

  • MCT-1/TS
    Read more Quick View

    MCT-1/TS

    The MCT-1/TS is an automatic machine for forming and gluing punnets and small trays with top ledges on 4 sides, also called Top Seal.

    • Double head machine.
    • Speed up to 4,800 punnets/hour (2,400 per head).
    • It is prepared for forming both square and octagonal Top Seal punnets.

  • HAT/D machine
    Read more Quick View

    HAT/D

    The HAT/D is a machine designed for box lidding with use of Hot-Melt, Its main advantages are:

    • It can cover boxes of 2 different base sizes and various heights.
    • It has a productivity up to 900 lids per hour.
    • Improved productivity by being able to lid multiple combinations of boxes.

  • Q-4000
    Read more Quick View

    Q-4000

    Double head machine specially designed for the forming of C-1 type trays, Conical trays and Bottom and Lid Boxes.

    • Hi production up to 4000 trays/hour.
    • Possibility of adjusting each head with different sizes of boxes.

  • EF-1000
    Read more Quick View

    EF-1000

    EF-1000 allows us to form and glue the bottom flaps of box HSC or RSC from a preassembled blank.

    Its ergonomic design and easy access to all components make this model ideal for the operation of closing American folding boxes.

    • Up to 1,000 boxes/hour (4 speeds)
    • Compact footprint with small dimensions
    • Low maintenance

  • Q-175
    Read more Quick View

    Q-715

    It is the perfect packaging solution for all those companies that require a compact, functional carton former suitable for a sustained production of 500 to 900 cartons/hour.

  • Q-1800/P
    Read more Quick View

    Q-1800/P

    The Q-1800/P is an adaptation to the needs of our customers who demanded a machine that integrates solutions focused on productivity, production control, improvement of autonomy, etc. but without losing the accessibility, flexibility and ergonomics of the machine.

    The Q-1800/P offers multiple tray forming possibilities: Plaform, P-84, Open Column, C-1, Citrus and Big Ear. which makes it a very flexible machine.

    It has a high-capacity blank feeder.

  • MBL-3P (Dual)
    Read more Quick View

    MBL-3P DUAL

    The Premium MBL-3P DUAL machine is specially designed for forming Bliss Boxes, but unlike the standard MBL-3P it can also assemble other box formats, such as: Plaform, P-84 and Open Column .

    It can reach a speed of up to 2,000 boxes/hour.